THERMOHEAT RMC-FA50/C/L Manual De Usuario E Instrucciones De Funcionamiento página 4

Tabla de contenido
Idiomas disponibles

Idiomas disponibles

Dyna-Glo ProPane ForceD air construction Heaters
The heater is designed and approved for use as a construction heater under anSi z83.7a, CSa 2.14a.
it is hard to anticipate every use which may be made of this heater.
FIRE SAFETY AUTHORITY IF YOU HAVE QUESTIONS ABOUT APPLICATIONS.
other standards govern the use of fuel gases and heat producing products in specific applications.
your local authority can advise you about these.
IMPORTANT: read ThiS uSer'S Manual CareFully and CoMpleTely BeFore Trying
To operaTe or ServiCe ThiS heaTer. iMproper uSe oF ThiS heaTer Can CauSe
SeriouS injury or deaTh FroM Fire, exploSion and CarBon Monoxide poiSoning.
This is a direct-fired forced air construction heater for either indoor construction or outdoor use. its intended
use is primarily the temporary heating of buildings or structures under construction, alteration or repair. all the
products of combustion generated by the heater are forced through the heater and released into the area being
heated. This heater operates at approximately 98%+ combustion efficiency but still produces a small amount
of carbon monoxide. humans can tolerate small amounts of carbon monoxide for short periods. Carbon
monoxide can build up in a heated space and failure to provide adequate ventilation could result in poisoning
or death.
Model No.
Input Rating
Type of Gas
Gas Supply Pressure to
Regulator Maximum
Minimum (for purpose
of Input Adjustment)
Manifold Pressure
Gas Consumption
Electrical Input
Amperage
Load
Unload
Fan
Load
Ignition
Spark Gap
Size (LxWxH)
Weight
3
PROPANE CONSTRUCTION HEATER
WARNING
: noT For uSe wiTh duCT work.
sPeciFications
RMC-FA50/C/L
30,000 BTU/hr
50,000 BTU/hr
Propane
Cylinder Pressure
5psig
11" W.C
1.4lbs/hr
2.3lbs/hr
120V, 60Hz, 1Ø
0.65amps
3570rpm
3300rpm
Continuous Spark
0.16" (4mm)
19.3"x8.3"x15.2"
(490x211x386)mm
14.3lbs (6.48kg)
RMC-FA60/L/L-01
30,000 BTU/hr
60,000 BTU/hr
Propane
Cylinder Pressure
5psig
11" W.C
1.4lbs/hr
2.8lbs/hr
120V, 60Hz, 1Ø
0.65amps
3570rpm
3300rpm
Continuous Spark
0.16" (4mm)
19.3"x8.3"x15.2"
(490x211x386)mm
14.3lbs (6.48kg)
CHECK WITH YOUR LOCAL
RMC-FA100/C/L
RMC-FA125/L/L-01
70,000 BTU/hr
70,000 BTU/hr
100,000 BTU/hr
125,000 BTU/hr
Propane
Propane
Cylinder Pressure
Cylinder Pressure
5psig
5psig
11" W.C
11" W.C
3.3lbs/hr
3.3lbs/hr
4.6lbs/hr
5.8lbs/hr
120V, 60Hz, 1Ø
120V, 60Hz, 1Ø
0.7amps
0.7amps
3580rpm
3580rpm
3300rpm
3300rpm
Continuous Spark
Continuous Spark
0.16" (4mm)
0.16" (4mm)
25.6"x12.7"x15.6"
25.6"x12.7"x15.6"
(650x323x396)mm
(650x323x396)mm
25.6"x11.8"x16.1"
25.6"x11.8"x16.1"
(650x300x409)mm
(650x300x409)mm
21.5lbs/21lbs/20.8lbs
21.5lbs/21lbs/20.8lbs
(9.75kg/9.5kg/9.4kg)
(9.75kg/9.5kg/9.4kg)
Tabla de contenido
loading

Este manual también es adecuado para:

Rmc-fa60/l/l-01Rmc-fa100/c/lRmc-fa125/l/l-01

Tabla de contenido