Basic Functions - Trevi XF 500 Manual De Instrucciones

ENGLISH
REMOTE CONTROL INSTRUCTION
30
20
21
22
23
24
FEATURES AND ACCESSORIES
In addition to its normal functions the device can also be connected to the audio output to the following devices: Mobile, PC, DVD, TV, MP3, digital
keyboards to amplify the sound (use the LINE IN).
In the package are:
• Unit
• Remote control
• Microphone with cable
• AC/DC adapter
• Instruction Manual
POWER
This unit works with rechargeable lead acid 12V 2.6A and 15V DC 2A power adapter supplied.
When the battery and 'being phased out or the device does not turn On, insert the AC/DC adapter plug into the socket of the device (11) and the plug
into a wall socket to recharge.
Do not connect other AC/DC adaptor with voltage and current different, use only AC/DC adaptor supplied.
When the internal battery is charged, the digital display(14) will be present icon
When the internal battery is low, the digital display(14) will be present icon
BATTERY CHARGE INSTRUCTIONS
Put the ON/OFF switch (12) to OFF to make a fast charge. The LED indicator (10) will turn red.
After charging the LED indicator (10) will turn blue.

BASIC FUNCTIONS

POWER ON/OFF
Press the POWER switch(12) to turn on/off the unit.
In case of malfunction of the device to disconnect the power supply and wait a few minutes before reconnecting.
MODE SETTING FUNCTION
To change the operation mode, press more 'times the MODE button (28) on the remote control. In order to select the input USB or SD memory must
be connected to the respective sockets/inputs (USB (3), SD/MMC (4)).
Remote control functions
20. Repeat key (Press it to single repeat or all repeat)
21. Sound mode key (Several EQ modes circulated, this key only works in USB/SD/MMC mode)
29
22. 0~9 Number key
23. Play/pause button
28
24. Volume- button
31
25. Next button
26. Volume+ button
27. Last button
28. Mode key (To change mode)
29. Mute Key (Press once to mute the device, repress to activate sound)
27
30. Stand-by button
26
31. INT/ALL button ( In USB/SD mode, press one time, it will be Intro function, means overview each
file for 10 seconds, once finish, it will start to play from the 1st file. When you press again, it will
25
play the file completely)
Installing the Batteries
Remove the battery cover from the Remote Control and put 2xAAA size batteries inside the compartment.
The diagram inside the Battery Compartment shows the correct way to install the batteries.
.
, first turned on, then flashing.
7
XF 500