Electrical Connections; Indicators; Alarms And Faults; Disposal - Roger Technology ACS/BA/60 Instrucciones Y Advertencias Para El Instalador

5

Electrical connections

Perform the connections to the control unit as shown in fig.
5-6-7-8.
Connect the grey wire to one of the control inputs (AP, CH,
PP, PED or ORO), the brown wire to the +24 terminal and the
black wire to the COM terminal.
Activate the control input (AP, CH, PP, PED or ORO) to the 19
parameter on the control unit.
An indicator light can be connected to the SC output to signal
anomalies or, by connecting a relay, an error alert contact may
be made available at an external control system (fig. 7 and 8).
For any other configurations or adjustments, refer to the
manual of the control unit CTRL.
6

Indicators

TEST mode error alert
DISPLAY POSSIBLE CAUSE
00 br Activated detachable
boom connection sensor,
or not connected, or in-
correct connection.

Alarms and faults

DISPLAY POSSIBLE CAUSE
brEA
Detachable boom con-
nection sensor in alarm.
10
CORRECTIVE ACTION
Check the settings of the
19 parameter.
Check the correct
connection of the system
to the control unit.
CORRECTIVE ACTION
Check the setting of the
19 param.
Check the correct con-
nection of the system to
the control unit.
Reconnect the boom.
Consider replacing the
boom if it is damaged.
7

Disposal

The product may only be uninstalled by qualified
technical personnel, following suitable procedures
for removing the product correctly and safely. This
product consists of numerous different materials.
Some of these materials may be recycled, while
others must be disposed of correctly at the
specific recycling or waste management facilities
indicated by local legislation applicable for this category of
product.
Do not dispose of this product as domestic refuse. Observe
local legislation for differentiated refuse collection, or hand
the product over to the vendor when purchasing an equivalent
new product.
Local legislation may envisage severe fines for the incorrect
disposal of this product.
Warning! Some parts of this product may contain substances
that are harmful to the environment or dangerous and which
may cause damage to the environment or health risks if
disposed of incorrectly.
8
Additional information and
contact details
ROGER TECHNOLOGY is the exclusive proprietor holder of all
rights regarding this publication.
ROGER TECHNOLOGY reserves the right to implement any
modifications without prior notification. Copying, scanning
or any alterations to this document are prohibited without
express prior authorised from by ROGER TECHNOLOGY.
ROGER TECHNOLOGY CUSTOMER SERVICE:
business hours: Monday to Friday
08:00 to 12:00 - 13:30 to 17:30
Telephone no: +39 041 5937023
E-mail: [email protected]
Skype: service_ rogertechnology