Important Recommendations - Roca Teletherm-Laura MT-2/M Instrucciones De Funcionamiento, Limpieza Y Mantenimiento Para El Usuario

a) If the two sets of numbers are not the same, the
equipment emits the message "Wrong code. Select
function". The code will not have changed.
b) If the two sets of numbers are the same, the equipment
emits the message "Correct code. Select function". The
code will have changed.
Pressing down the Reset button on the heater's control
panel for 10 seconds (See figure) will clear the 4-digit
code introduced by the user. Only the original code will
work.
Compatibility with answering machines
When there is an answering machine or other apparatus
that unhooks the phone automatically before the eight ring,
the equipment should be adjusted to answer at the second
ring. Proceed to:
1 – Dial the number of the connected to the equipment.
2 – Let the phone ring three times and hang up.
3 – After 15 seconds call again. The equipment will
answer at the second ring.
Warning:
If more than one minute lapses betwenn the dirst and
second call, the equipment will go back to answering at
the eight ring.
Consulting or changing the "heating"
service
1 – Once the correct code is entered, dial 1. The
equipment emits the message "Heating ON" or
"Heating OFF".
2 – To change the dunction, dial 1 again.

Important recommendations

This equipment does not need special ventilation, cleaning
or maintenace.
Warning about defective running according to annex II of
the Order 27 th of January, 1999, B.O.E. 42 of 18
February, 1999.
This equipment conforms to Directive 98/13/CEE only for
terminals connected to a Switched Public Telephone
Network (SPTN). Nevertheless, given the different
countries, this conformity is not an unconditional guarantee
of correct functioning at all the terminal points of the SPTN.
Should any anomaly be detected, contact your supplier.
The use of this equipment in any way not specified by the
manufacturer can compromise its safety.
Under no circumstances should the user open the "control"
box or change the electrical cables, even if damaged.
4
Note:
Specifications and performance subject to change without
notice.
CE Marking
The TELETHERM MT-2/M telephone module conforms
to the European Directives 72/23/CEE for Low Tension,
89/336/CEE for Electromagnetic Compatibility and
1999/05/CEE for terminals designed for connecting
to the Public Switched Telephone Network (PSTN).
th of