Set Pad Gain; Save Kit - Oqan QPD-7 ADVANCED DRUM Manual De Instrucciones

Set pad gain

Press [gain] button to enter pad assign menu. If pad
assign menu is selected, the corresponding menu
indicator will be lit up.
In this menu, the 3-digit LED will show the gain of
current pad, which can be selected by pressing pad
assign button on the top panel or by pad hitting. The
button select [+] / [ ] or [ dial ] can be used to select
the gain (0-9, loop) for current pad.

Save Kit

Press [save] button to enter the kit save menu.The
button select [+] / [ ] or [ dial ] can be used to select
a user kit ( 21-30, loop) current kit setting. During
kit selecting the user kit number will keep flashing.
Press [ save ] button again, the current kit setting will
be saved to the selected kit. The machine will quit to
the kit menu and select this user kit as the current
one, if all the data has been saved successfully.
If saving is failed due to error, an Err will appear on
the LED.
NOTE:
The unsaved kit setting will be lost after kit changing.
8