SATA 51325 Manual Del Uso página 15

General Electric Tools Safety Warning:
Notice:
Read all the warnings and instructions
Disobey the following warning and instructions will cause electric shock, fire or serious injury
Keep all warnings and instructions for reference.
Workplace Safet:
1 ）Keep the work site clean and bright.
2）Do not operate electric tools under the explosive environment, such as flammable liquids, gases or dust. Electrical tool's spark ignites
gas or dust.
3）Keep children and spectators away then operate electric tools. Lack of attention would cause losing control of the tool.
Electrical safety:
1）The electric tool plug must be matched with the socket. Never to modify the plug. Electric tools that need to be grounded can not be
switched. Unmodified plugs and matching sockets will reduce the risk of electric shock.
2）Avoid touching the ground surface, such as pipes, heat sinks and fridge and so on. If your body touch the ground, you will increase
the risk of electric shock.
3）Electric tools can not be exposed to rain or wet environment. Water entering electric tools will increase the danger of electric shock.
4）No wires should be abused. Never use electric wires to carry and pull electric power tool or a plug is pulled out. Keep the wire away
from the heat, oil, and sharpness side or moving part. Damaged or twining cords will increase the danger of electric shock.
5）When power tools are used outdoor, apply suitable outdoor external floppy line. Cords suitable for outdoor use will reduce the risk of
electric shock.
6）If it is unavoidable to operate electric tools in wet environment. The residual current action protector（RCD） should be used. RCD
can reduce the danger of electric shock.
Note: the term "residual current operated protector（RCD）" is available to use "Ground fault circuit interrupter（GFCI）" and" Ground
leakage circuit breaker （ELCB） " term replaced.
Personal Safety:
1 ）Be vigilant when operating electric tools, pay attention to what you do and keep awake. When you feel tired or have a drug, do not
operate electric tools when alcohol is reacting. Instant carelessness in the operation of electric tools can cause serious personal
injury.
2）Apply the personal protective equipment. Always wear protective goggles and other safety protection equipment, such as proper use
of dust mask and anti slip safety. Shoes, helmet and hearing protection devices can reduce personal injury.
3）Prevent accidental starting. Make sure that the switch is connected to the power supply and / or battery boxes, pick up or carry tools
are in a closed position. If put your finger on the switch with the power supply which can lead to dander.
4）Remove all adjusting keys or wrenching before electric tools power on. It can cause personal injury if wrench or key left on electric
tool rotary parts.
5）Don't stretch your hands too long. Always pay attention to the foothold and the balance of the body.
6）Appropriate dress. Don't wear loose clothes or wear ornaments. Let the clothes, gloves, and hair away from the moving parts. Loose
clothes, ornaments or long hair may be involved in moving parts.
7）If a device is provided for connection with chip removal and dust collecting equipment, make sure that they are well connected and
properly used. It can reduce the dangerouscaused by dust with these devices.
51325/05157
中文
EN DE RU KO PT JA ES
15