Spracht AURA SoHo Serie Guia De Instalacion página 4

8. Turn the Aura SoHo™ Conference Phone right side up. Reconnect the AC power
cable. Turn ON the Aura SoHo™ Conference Phone. After a couple of seconds, 3 special
tones will be heard. The Aura SoHo™ Conference Phone is installed correctly and ready
for Bluetooth® pairing.
Bluetooth® Pairing
Bluetooth® Pairing Procedure
9. Press and hold the CONF button for a couple of seconds, until both the Amber and
Blue LEDs are flashing. Release the CONF button. The Aura SoHo™ Conference Phone
is ready for pairing.
10. On your cell phone, navigate to the "Discover Device" function. Your cell phone will
find "BTHS".
11. Select BTHS. Your cell phone will ask for a pin number. Enter 0000. If your cell phone
requires a response from the Aura SoHo™ Conference Phone, press the CONF button.
12. Your cell phone is now paired to the Aura SoHo™ Conference Phone. The next time
you want to make a call using your cell phone, it will automatically pair: you will not
need to pair again.
Note: The Aura SoHo™ Conference Phone will stay in pairing mode for 60 seconds. If pairing has
not been established in that time, the Aura SoHo™ Conference Phone will go into power saving
mode. Re-power and start again at Step 9.
ON
In Bluetooth® Mode, only the circled buttons are active.
The Keypad Functions are:
CONF - Activates Bluetooth® functionality.
HOLD - Turns the input and output sound ON and OFF .
MUTE - Turns the Mic ON and OFF.
VOL - Up and Down- Speaker Volume Control.
OFF