Scotts LCS31440S Manual Del Operador página 14

Problem
- Unit does not run
Bar and chain running hot
-
and smoking
- Motor runs but chain is not
rotating
- Motor stops while switch
trigger is depressed
TROUBLESHOOTING
Possible Cause
- Battery not making contact
- Lock off button not fully operated
- Battery not installed properly
- Battery not charged
- Check tension for over-tight
condition
- Chain oil tank empty
- Chain installed backwards
Chain tension too tight
-
- Check guide bar and chain for
damage
- Motor is overloaded
Call us first with questions about operating or maintaining your product
at 1.800.618.7474 between 8:00 a.m. – 5:00 p.m. Eastern Standard Time,
or get assistance on scotts.americanlawnmower.com.
-Check battery is fully inserted
-Check that lock off button is fully forward prior to
moving trigger
-Check battery installation
-Check battery charging requirements
- Adjust chain tension
- Fill tank with chain oil
- Reverse chain so that cutters face the right
direction
- Adjust chain tension
- Replace damaged bar and chain with identical
replacement parts.
- Release switch trigger, wait several seconds,
then depress trigger again.Motor should restart.
If it doesn't, remove battery pack, reinstall
battery pack, then try again.
CALL US FIRST !!
14
Model LCS31440S
Possible Solution