juju Fun racer Manual Del Usuario página 12

Fig.1.3
Crossing safety-belt through the cavity into another side, make sure the
safety belt is limited in the guide hook. The guide hook of the safety belt can
limit the movement of the safety beltand keep it in the best fasten position.
Fig.1.4 Pull out the bellyband of safety belt from both sides, bypass the chair
armrest.
Fig.1.5
Insert the lock tongue into the buckle with the sound "click", it is fastened.
Fix the chair firmly, tighten safety-belt, after tightening the bellyband.
Fig.1.6
Then tighten excessive shoulder belt, check the safety is not being twisted
Fig.1.7
and winding
!!! The loose seat-belt can not display the protect function of the chair.
Harness system for Group I
Fig.2.1 Place the child in the chair
Fig.2.2
Important! Slide buckle tongues together.
Insert the combined lock tongue into the buckle.
Fig.2.3
With the sound "click" the buckle is locked, make sure the insertion tongue
Fig.2.4
locked in right position.
Fig.2.5
5 points buckle can not insert into only one side lock tongue.
Fig.2.6 Tighten the shoulder-belt of 5 point harness. The degree of tightness of 5
points harness is appropriate if it allows two adult fingers to accommodate. !!!
Warning: it is bad for protecting your children's travel safety with too loose
safety belt.
Securing your baby suing the harness
Fig.3.1 Press the button of strap adjusting device.
Press the button, at the same time, pull out the both adjusting straps of the
Fig.3.2
shoulder belt.
Fig.3.3
Pull out the adjusting straps.
Adjust the height of shoulder belt
Fig.4.1 Take down the shoulder belt's strap of 5 point safety-belt from strap
connector.
Fig.4.2 Then re-insert strap of shoulder belt into the appropriate shoulder belt hole.
Page 12