Information; Supported Monitor Display; Maintenance - LG HX300G Manual De Usuario

Information

Information

Supported Monitor Display

* The following table lists the display formats supported by the projector.
Format
< DVD/DTV Input >
Signal
480i
480p
NTSC (60 Hz) 720p
1080i
1080p
576i
576p
PAL (50 Hz) 720p
1080i
1080p
24 / 30 Hz 1080p

Maintenance

*The projector needs little maintenance. You should keep the lens clean because any dirt or stains may appear on the
screen. If any parts need to be replaced, contact your dealer. When cleaning any part of the projector, always turn the
power off and unplug the projector first.
Cleaning the lens
If there is any dust or stain on the surface of the lens, you must always clean the lens. Use an air spray or cleaning cloth
for product exterior, provided with the product, to lightly clean the product. Please use a recommended air spray or lens
cleaning product.To clean lens, small amount of cleaning agent on a swab or a soft cloth and rub on the lens. Please be
aware that liquid may flow pass through the lens if the product is sprayed on lens directly.
Cleaning the Projector Case
To clean the projector case, first unplug the power cable. To remove dirt or dust, wipe the casing with polish cloth provid-
ed. When you want to remove the dust or stain on the lens, use the cloth for product exterior, provided with the product.
Do not use alcohol, benzene, thinners or other chemical detergents as these can cause the casing to be warped or discol-
ored.
22
Vertical Freq.(Hz) Horizontal Freq.(kHz)
Component-*1 HDMI-*2
O X
O O
O O
O O
O O
O X
O O
O O
O O
O O
O O
* If the projector does not support the input signal,
"Invalid Format" message appears on the screen.
* The projector supports DDC1/2B type as Plug &
Play function. (Auto recognition of PC monitor)
* PC synchronization signal types supported
:Separate type synchronization.
* To get the the best picture quality, adjust the PC
graphics card to 1024x768.
* Cable type
1- RGB to Component Cable
2- HDMI Cable