Terk THINTV1A Guia Del Usuario página 12

Setting Up the THINTV1A
(continued)
To remove the antenna (and mounting strips) from
the wall:
If you want to mount the antenna to the wall again,
you can find replacement strips at most retail or drug
11
stores.
1. Hold the antenna against the wall
gently to keep it in place. DO NOT
press the antenna against wall.
2. Find the tab for the single
mounting strip at the bottom of
the antenna (on the metal part).
Stretch the tab straight down
(away from the antenna) at least 12
inches until the strip releases.
IMPORTANT: NEVER pull the strip
tab towards you.
3. Pull the antenna off the wall
slightly so that you can reach the
tabs for the two mounting strips at the top of the
antenna. Repeat step 2 for each of these tabs as
well.
Note: If you can't reach the tabs, you can remove
the antenna from the mounting strips using a
piece of dental floss. Gently run the floss behind
the antenna, between the strips and the antenna,
until the strips separate. Then perform step 2
above for each of the strips by themselves.
4. Remove the mounting strips from the antenna.