GE AEN08 Serie Manual Del Propietario E Instrucciones De Instalación página 11

INSTALL THE CASE IN THE WINDOW
8
Open the window and mark the centerline of
A
the window sill.
Carefully place the case on the window stool
B
and align the center mark on the bottom front
with the centerline of the sill.
Pull the window down behind the top mounting
C
rail.
NOTE: Do not shut the window so tightly that
movement of the accordion panels is
restricted.
Secure the case to the window sill by using 2
D
Type D screws.
Installation Instructions
11
INSTALL THE CASE IN THE WINDOW
8
(CONT.)
Pull the accordion panels to each window sash
E
track. Attach them on each side to the window
sash and the window sill using 4 Type C screws.
INSTALL SUPPORT BRACKET AND
9
FOAM TOP WINDOW GASKET
A
CAUTION:
To prevent broken glass or
damage to windows, on
vinyl or other similarly
constructed windows,
attach the support bracket
to the window side jam.
Attach the support bracket
with one Type C screw.
Cut the foam top window gasket to the window
B
width.
Stuff the foam
C
between the glass
and the window
to prevent air and
insects from getting
into the room.
NOTE: If the gasket supplied does not fit your
window, obtain appropriate material locally to
provide a proper installation seal.
Vinyl
Wood