Electric Brake - Craftsman 5727.1 Manual Del Operador

TRIGGER SWITCH (Fig. 3)
To turn the impact driver ON,
depress the trigger switch.
To turn it OFF, release the
trigger switch.
VARIABLE SPEED (Fig. 3)
The variable-speed trigger
switch delivers higher speed
with increased trigger pressure
and lower speed with decreased
trigger pressure.
DIRECTION-OF-
ROTATION SELECTOR
(FORWARD/CENTER-LOCK/
REVERSE) (Fig. 4)
The direction of bit rotation is
reversible and is controlled by
a selector located above the
trigger switch.
With the impact driver held in
normal operating position, as
shown in Fig. 4:
1. Position the direction-of-rotation selector to the left of the tool for
forward rotation.
2. Position the direction-of-rotation selector to the right of the tool for reverse.
3. Setting the switch in the OFF (center-lock) position helps reduce the
possibility of accidental starting when not in use.
NOTICE: To prevent gear damage, always allow the impact driver to come to a
complete stop before changing the direction of rotation.
NOTICE: The impact driver will not run unless the direction-of-rotation selector
is engaged fully to the left or right.

ELECTRIC BRAKE

To stop the impact driver, release the trigger switch and allow the tool to come
to a complete stop. The electric brake quickly stops the coupler from rotating.
This feature engages automatically when you release the trigger switch.
Fig. 3
Variable-Speed
Trigger Switch
Fig. 4
Reverse
12
Forward
Direction-of-
Rotation Selector