Lenco DVP-9412 Manual Del Usuario página 9

SETUP Menu Setting
Preference Page
PAL - Select this if the connected TV is PAL system.It
video signal of a NTSC disc and output in PAL format.
NTSC-Select this if the connected TV is NTSC system.It will
the video signal of a PAL disc and output in NTSC format.
Auto:Change the video signal output automatic according to the
playing disk format.
Audio:Selects a language for audio (if available).
Subtitle:Selects a language for subtitle (if available).
Disc Menu:Selects a language for disc menu (if available).
Parameters and specifications
Electronical parameters
Item
Power requirements
: AC 100-240 V , 50/60 Hz
Power consumption
: <10W
Operating humidity
: 5 % to 90 %
VIDEO OUT
:1.4 Vrms (1 KHz, 0 dB)
AUDIO OUT
:Speaker:1WX2,
Audio
System
Laser :Semiconductor laser, wavelength 650 nm
Signal system : NTSC / PAL
Frequency
: 20Hz to 20 kHz(1dB)
response
Signal-to-noise ratio :More than 80 dB (ANALOG OUT connectors only)
Dynamic range
:More than 85 dB (DVD/CD)
N
Note: Design and specifications are subject to change prior notice.
change
will the
change
Standard requirement
Headphones output
8
Battery Parameters
Battery Specifications：
Output：7.4V
Charge / Discharge Time：
Standard charge time：3h ~ 4h
Storage and work circumstances：
1. Storage circumstances Temperature
6 months
1 week
2.Work circumstances Temperature
Standard charge
Standard discharge
Battery Charging
Connect the DVD player to the supplied power adaptor, the LED
indicator will be RED when the battery is charging and will turn into
green when the battery is full charged.When battery is no power,
LED is OFF.
Humidity
-20°C ~ +45°C 65±20%
-20°C ~ +65°C
65±20%
Humidity
65±20%
0°C ~ +45°C
-20°C ~ +65°C 65±20%