Setup; Getting Started - Blueair JOY S Manual De Instrucciones

SET UP

Getting started

1 2
Press the top button to turn
Plug in your JOY S air purifier.
the unit on.
Adjust the speed setting to
the required level (see "On/
off and speed control").
10
On/off and speed control
2
1
On/Low Medium
Press once to turn the Press twice to set to medium
unit on and set it to the speed 2.
recommended energy-
efficient speed 1.
4
INFORMATION
The indicator light(s) on the touch button indicate the select-
ed speed for a period of 7 seconds. After 7 seconds the
light(s) dim down indicating a a non-active speed control
mode.
Press the touch button once to reactivate on/off and speed
control. The indicator light(s) light up and you can adjust the
speed setting again.
Off
Press a fourth time to turn the
unit off.
Moreover, JOY S has an Autostart feature. This means that JOY
S will automatically restart at the set speed if a power failure
occurs, the unit is unplugged or a power switch timer is used.
ON/OFF AND SPEED CONTROL
3
High
Press three times to set to
high speed 3.
11