Setting The Clock; Preparation Of Coffee - Kalorik CM 38933 Manual De Instrucciones

Tabla de contenido
Idiomas disponibles

Idiomas disponibles

Fax +1 305 430 9692
BEFORE FIRST USE
When you use your appliance for the first time, pour fresh water into the
water tank (without coffee) and switch on the appliance.
Once all the water has passed through, switch off the appliance and let
it cool down. When it is cold enough repeat the process 3 times with
fresh water.

SETTING THE CLOCK

To set the digital clock, press the PROG button (10). "CLOCK" is displayed
on the screen. Press the "H" button (5) until the clock displays the desired
hour. Press the "M" button (6) until the clock displays the desired number of
minutes. Press "PROG" button twice to exit the clock setting program.

PREPARATION OF COFFEE

Open the lid (1) of the water tank (2) and pour the desired volume of
water in it. The water level can be read off the water level indicator.
Never exceed the maximum level indicated, corresponding to 12 cups
of coffee.
Insert a paper filter, or the permanent filter supplied, into the filter holder;
place the removable filter holder in the cavity (3) and add the desired
quantity of ground coffee using the provided scoop.
Never forget to close the water tank lid before switching on the coffee
maker.
Put the carafe (7) with its lid closed on the heating plate.
Plug in the coffee maker on a wall outlet.
Press the ON/OFF button (11) once. The red light "BREW" (13) will
illuminate, indicating that your appliance is in use, along with the LCD
display of the clock (12). The screen will remain backlit during the whole
brewing process.
Thanks to the electronic keep warm function, your coffee will be kept
warm for 2 hours, unless the coffee maker gets switched off (see below).
Your coffee maker is equipped with a "Pause-and-Serve" aka drip stop
function (9), which means that when you remove the carafe from the
appliance, a non-drip valve will automatically operate to stop any
drops of coffee falling onto the heating plate (8). When you put the
carafe back into place, the non-drip valve opens automatically and
allows the remaining coffee to filter through, into the jug.
Wait until the brewing process is finished and the filter is empty of water
before removing the carafe.
Copies of the I/B. Please reproduce them without any
changes
except
under
International USA. The pages must be reproduced and folded
in order to obtain a booklet A5 (+/- 148.5 mm width x 210 mm
height). When folding, make sure you keep the good
numbering when you turn the pages of the I/B. Don't change
the page numbering. Keep the language integrity.
what is inside the frame.
5
Assembly page 5/26
special
instruction
from
Team
Print only
CM 38933 - 120501
Tabla de contenido
loading

Tabla de contenido