Tabla de contenido
Idiomas disponibles
Idiomas disponibles
FT SK9031
GENERAL INTRODUCTION
The SK9031 Surface Mifare® Reader must be used in connection with SK9020 Control
Unit.
It has a 32 bit Wiegand output which is also used to connect to any type of access
control unit using this protocol. The Mifare keys will then be used as a reader and
managed on the unit.
It may be installed inside or outside the premises.
The token is read by swiping it over the reader.
Connection
Black: + 12 v
Yellow: - 12 v
Green: D+ (RS485)
Red: D+ (RS485)
White: D0 (Wiegand)
Yellow: D1 (Wiegand)
Grey: 0v (Wiegand)
Technical characteristics
• Communication via RS485 or 32 bit Wiegand
• Operating voltage: 12 - 24V DC or AC
• Consumption when idle: 30 mA
• Consumption when reading: 100 mA
• Operating temperature: -10°C - +55°C
• Dimensions (H X L X D): 62 x 88 x 23 mm
• Reading distance: Approx. 3 cm
3
FT SK9031
Tabla de contenido
