using the mount on windows with significant curvature).
• After installing the mount on the window, attach the scope to the tripod platform with the
mounting screw (C). Loosen and adjust the pan/tilt handle (E) to point the scope as needed,
then tighten it.
CLEANING
The lenses of your Trophy Xtreme spotting scope are multi-coated for highest light transmission.
As with any multi-coated optics, special care must be taken in cleaning the lenses. Follow these
steps for proper lens cleaning:
• Blow away any dust or debris on the lens (or use a soft lens brush).
• To remove dirt or finger prints, clean with the supplied micro-fiber cloth rubbing in a circular
motion. Use of a coarse cloth or unnecessary rubbing may scratch the lens surface and
eventually cause permanent damage. The included washable microfiber cleaning cloth is
ideal for the routine cleaning of your optics. Simply breathe lightly on the lens to provide a
slight amount of moisture, then gently rub the lens with the microfiber cloth.
• For a more thorough cleaning, photographic lens tissue and photographic-type lens cleaning
fluid or isopropyl alcohol may be used. Always apply the fluid to the cleaning cloth – never
directly on the lens.
GENERAL CARE and CAUTIONS
Never disassemble your spotting scope. Irreparable damage can result from unauthorized
service attempts, which also void the warranty.
6