Installation - Glacier bay 2130NNHD Guía De Uso Y Cuidado

Installation (continued)
1
Measure distance to ceiling
NOTE: No matter the distance, tubes (A) and (B) are
ALWAYS used.
□ Measure the distance between the tub ledge or the shower
stall floor to the ceiling to the nearest inch.
□ Refer to the Troubleshooting section at the end of this
manual to know what tubes (C) and (D) that are needed.
2
Connecting the shelves to the tube
NOTE: Shelves (E) can be adjusted by moving the
wedges (AA) up or down.
□ Place a wedge (AA) (tapered or rounded end up) on one of
the long tapered tubes (C) approximately half way down.
□ Slide the shallow wire shelf (E) down the tube and fit over
the wedge.
□ Place a wedge (AA) (tapered or rounded end up) on the
long tapered tube (C).
□ Slide another shallow wire shelf (E) down the tube and fit
over the wedge (AA).
□ This is the upper tube assembly.
tub ledge
shower stall floor
5
Please contact 1-877-527-0313 for further assistance.
C
E
AA
E
HOMEDEPOT.COM