Telstar TVP016210MD Manual De Instrucciones página 9

BATTERIES INSTRUCTIONS
(BATTERY NOT INCLUDED IN THE PACKING)
1.
Press down on the battery compartment cover and slide it out.
2.
Insert the batteries, making sure that the positive terminals are facing the proper way.
3.
Replace the cover.
BATTERY WARNING AS BELOW
1.
"Do not dispose of batteries in fire, batteries may explode or leak."
2.
Do not mix old and new batteries.
3.
Do not mix alkaline, standard (carbon-zinc) or rechargeable (nickel-cadmium) batteries.
HOW TO USE THE REMOTE CONTROLLER CORRECTLY
Point the remote controller at the receptor on body of the fan and press the desired button. The remote
controller will work at distances of up to roughly five meters and the angle of 30 degree included between
right and left from the receptor.
The batteries must be removed from the remote controller before it is scrapped and that they are disposed of
safely.
OVERHEAT PROTECTION OF THE MOTOR
The windings of the motor have a thermal-fuse that burns out and the fan switches off and temperature of the
motor is no longer going up so that plastic parts of the fan don't subject to deformation so far so to be burned
by the overheat if the motor is overheat for any unexpected reason.
CLEANING
1. Be sure to unplug from the electrical supply source before cleaning.
2. Plastic parts should be cleaned with mild soap and a damp cloth or sponge.
Thoroughly to remove soap film with clean water.
3. Be sure not to make water or other liquid enter inside of motor.
9
STAND FAN
TVP016210MD