Brinly FB-42RY El Manual Del Propietario página 10

================================================================================================
1/2"
Assembly Step 7
Push Arm Assembly
2. Attach pivot weldment (8) to the push
3/8"
arm assembly using:
- 1 Hex Head Bolt (32) – 1/2" x 2"
x
- 1 Washer, Flat (35) – 1/2"
x
- 1 Washer, Thick (19)
x
- 1 Lock Nut, Hex (37) – 1/2"
x
5/16"
NOTE: Do not over tighten,
the two brackets should be able
to move freely of one each other,
1/4"
but not so loose that there is play
in the joint.
5"
4"
3"
Assembly Step 8-A
Adding the Handle
2"
1. Rotate the pivot weldment (8)
2. Start to run hex head bolt,
3/8" x 3 3/4" full thread (43)
through the first hole of the push
arm assembly & add:
- 1 Hex Nut (44) – 3/8"
x
1"
External-teeth need to be facing
away from the head of the bolt.
0"
1018348-B
ASSEMBLY
3/4" Wrench & Socket
9/16" Wrench & Socket
8
push arm
assembly
rotate
the pivot
weldment
8
**Exterior circumference of washers can vary.
These dimensions are a measurement of the
10
32
pivot
weldment
35
19
37
rotate
the pivot
weldment
43
44
internal diameter of the washer.