Lighting The Side Burner - Grill King 810-2545-C Manual Del Propietário

Tabla de contenido
Idiomas disponibles

Idiomas disponibles

MATCH LIGHTING THE MAIN BURNERS:
1. Open lid before lighting burner.
2. Make sure all control knobs are in the "OFF" position.
3. Place a paper match in the end of the matchlighter. Strike the match and place through lighting hole in
the left hand side of the grill to approximately 1/2" (1 to 2 cm) from the burner.
4. Turn on the FAR LEFT burner control knob to the "HIGH" position. The burner should light within
5 seconds.
5. If the burner does not light, turn the control knob to "OFF" and wait
5 minutes for gas to dissipate and repeat lighting procedure.
6. Once lit, light adjacent burners in sequence by pressing in and rotating the
control knob to the "HIGH" position.
7.
If the burner does not light within the fi rst few attempts of match lighting,
there is a problem with the gas supply. Turn off the gas at the burner and
cylinder. DO NOT attempt to operate the grill until the problem is found and
corrected.
Note:
If burner does not light or fl ame is too low, See "Trouble Shooting"
section of the owners manual.

LIGHTING THE SIDE BURNER:

1. Open lid before lighting side burner.
2. Make sure control knob is in the "OFF" position.
3. Push and hold down side burner control knob and SLOWLY
(2 to 3 seconds) turn to "HIGH" . You should hear the igniter click.
Note:
Step 3 may need to be repeated 2-3 times to light side burner.
4. If ignition does NOT occur in 5 seconds, turn control knob to "OFF" , wait
5 minutes to allow gas to dissipate and repeat lighting procedure.
5. If burner does not ignite using the igniter, see "Match Lighting the Side
Burner" section.
6. To turn off, turn control knob clockwise until it locks in "OFF" position.
Note:
If burner does not light or fl ame is too low, See "Trouble Shooting" section of the owners manual.
MATCH LIGHTING THE SIDE BURNER:
1. Open lid before lighting side burner.
2. Make sure control knob is in the "OFF" position.
3. Strike and carefully place a match approximately 1/2" (1 to 2 cm) from the burner.
4. Turn the side burner control knob to the "HIGH" position. The burner should light within 5 seconds.
5. If the burner does not light, turn the control knob to "OFF" and wait
5 minutes for gas to dissipate and repeat lighting procedure.
6. If the burner does not light within the fi rst few attempts of match lighting, there is a problem with the gas
supply. Turn off the gas at the burner and cylinder. DO NOT attempt to operate the grill until the problem
is found and corrected.
Note:
If burner does not light or fl ame is too low, See "Trouble Shooting" section of the owners manual.
Note:
Observe fl ame height when lit: Flame should be a Blue/Yellow color
between 1"-2" (3 to 5 cm) when burner is on "HIGH" .
See section in manual on burner adjustment to adjust fl ame.
Lighting Hole
Matchlighter
10

Capítulos

Tabla de contenido

Solución de problemas

loading

Este manual también es adecuado para:

810-2546-c

Tabla de contenido