Assembling + Installing The Bassinet - BabyCargo PLUSH + PLAY Manual De Instrucciones

9
SECTION E
ASSEMBLING AND INSTALLING THE BASSINET
• Lay the Bassinet Cradle Assembly open and flat on an uncluttered
work surface. Notice the four sleeves on the floor of the Bassinet
Cradle Assembly.
• Grab one of the Structural Support Poles. (Each Pole is made up of two
halves, one slightly larger than the other.) Slide the larger half into one of
the four sleeves.
• In the sleeve directly opposite, slide the smaller half of the Structural
Support Pole.
• Join the Structural Support Pole halves by inserting the smaller half into
the larger half until the lock-pin pops into place. (Pole should now be
rigid and sturdy.)
• Repeat the above three steps for the second Structural Support Pole.
Click
Click