Tabla de contenido
Idiomas disponibles
Idiomas disponibles
2. Using the Application on Android or iOS
This section describes the procedures for using "RICOH SP 300 series SOM"/"RICOH SP 200
series SOM" from smart devices.
The procedures and the screens in this manual are examples based on Android 6.0.x. The actual
procedures and the screens displayed may vary depending on the operating system you are using.
2-1 Installing the Application
According to the machine you are using, search "RICOH SP 300 series SOM" on the App Store
if you are using iOS or "RICOH SP 200 series SOM" on the Google Play store if you are using
Android, and install them.
This application is free of charge. However, you must pay for the packet communication fees for your Internet provider.
2-2 Connecting to the Machine
Connect a smart device to the machine using the Wi-Fi Direct function.
For details about connecting methods, see the Wi-Fi Direct Guide in the provided CD-ROM or on
our website.
RICOH SP 300 series
Wi-Fi Direct Guide
Easy Setup Using Wi-Fi Direct
Troubleshooting
http://www.ricoh.com/printers/
sp310/support/gateway/
2-3 Writing Information to the NFC Tag on the Machine
(on Android devices only)
You need to write an IP address the first time you use the NFC tag after installing the machine.
Use the following procedure to write the IP address.
1. Print a QR code from the
machine.
On the multi-function printer
1. Press the [User Tools] key.
or
DSG126
RICOH SP 200 series
or
http://www.ricoh.com/printers/
sp200/support/gateway/
2. Press the [
List/Report], and then press the [OK] key.
User Tools
Tray Paper Settings
Network Settings
Print List/Report
3. Press the [
[Maintenance Page], and then press the
[OK] key.
4. Press the [OK] key.
The machine prints a QR code.
On the single-function printer
Print a maintenance page from Web Image Monitor.
For details, see "Print List/Report", User's Guide.
2
DSG622
] or [
] key to select [Print
10 10
] or [
] key to select
DSG621
Tabla de contenido
