Glomex PANDORA V8000 Manual Del Usuario E Instalación página 50

PANDORA V8000 - URANIA 2 V9330
Fig. 13
S
WARNING
For a correct assembly, respect the installation
direction indicated in Fig. 10.
A different installation from the recommended one could cause an incorrect operation of the antenna
due to the risk of water penetration into the
radome.
Central coaxial cable
conductor
48
Instructions for V8000
8. Position the antenna onto the seal, inserting the
4 threaded bars through the holes, and pay
attention to direct the orientation symbol of the
antenna towards the bow.
Fig. 14
9. Install the fastening reinforcements onto the
threaded bars and screw in the M8 self-locking
nuts.
Fig. 15
10. Completely tighten.
S
WARNING
GLOMEX declines any liability for an incorrect
mounting of the radome on the boat.
11. Have the 10 m cable pass through the
previously drilled hole.
Should it be necessary to shorten the cable,
please refer to the instructions given in Fig. 12
on the previous page.
www.glomex.it