Famastil 1200W Manual De Instrucciones página 40

SWITCH (PIC 10)
01
To operate the tool, depress the trigger
switch (1). The tool will continue to run
as long as the trigger is depressed.
02 To turn the tool off, release the trigger
switch (1). There is no provision for lock-
ing the tool on, and the switch should
never be locked on by any other means.
USING THE CUTTING GUIDES
The tool is equipped with a sight guide
for straight cutting (PIC 11) and for 45°
miter cutting (PIC 12).
Align the left edge of the guides or
01
with the cutting line.
02 Keep the kerf plate aligned with the
cutting line while sawing.
03
Work with the shoe pressed against
the workpiece.
SAWING (PIC 13)
To reduce the risk of serious
personal injury, always hold the
tool with both hands.
Let the blade run freely for a few
seconds before starting the cut.
01 Apply only a gentle pressure to the tool
while performing the cut.
02 Work with the shoe pressed against
the workpiece.
40
OPERATION
WARNING!
PIC 10
PIC 11
PIC 12
PIC 13