Continuous Measurement - Hammerhead HLMT100 Manual Del Usuario

OPERATION

6. CONTINUOUS MEASUREMENT

The continuous measurement function can used for the transferring measurements, e.g.,
from construction plans. In the continuous measurement mode, the compact laser measuring
tool can be moved relative to the
predetermined distance, during which time the actual, changing measurement is displayed
continuously.
a. Press the mode button
indicator
b. Press the measure button
c. Press the measure button
d. Move the tool until the required distance value is indicated at the bottom of the display.
e. The continuous measurement will continue to measure for about 3 minutes, and the
measurement will automatically stop after 3 minutes.
6
NOTE: Press any button to stop the continuous measurement during the 3 minutes.
f. Press the measure button
12
target. As an example, the user can move from a wall to a
to move the cursor to the continuous measurement
.
to turn on the laser beam; the laser indicator will blink.
MEASURE
again to take measurement.
MEASURE
again to make a new measurement.
MEASURE
COMPACT LASER MEASURING TOOL