Telepro OZTP500DAV Manual Del Operador página 11

Cleaning & Lubricating the Crane
The TELE-PRO DAVIT CRANE by OZ Lifting Products LLC® should be periodically cleaned to
preserve its appearance and to prevent corrosion. The TELE-PRO DAVIT CRANE by OZ Lifting
Products LLC® will last longer and perform better when it is kept clean and lubricated.
NOTE: No solvents should be used on any parts of the TELE-PRO DAVIT CRANE by OZ Lifting
Products LLC® for cleaning or any other purpose.
Instructions:
1. Wipe the surfaces of the crane with a wet cloth. Detergents are not necessary.
2. The steel surfaces should have a light film of oil applied to them to prevent corrosion.
NOTE: No lubricants of any kind should be applied to the brakes in the winch. If the brake pads get
contaminated with oil, they may slip.
3. Remove any excess oil with a clean cloth.
4. Lubricate the bushing in the load sheave with a light coat of grease.
5. Lubricate the shaft bearing surfaces on the winch with a light coat of grease, taking care not to
get any oil or grease on the brake pads of the winch.
EN pg.11