NVision NV622 Manual Del Propietário página 2

Tabla de contenido
Idiomas disponibles

Idiomas disponibles

Overview
This product is a professional, remote-control, lighting wire management system. The RCLS is designed
for operating accessories (including lights, horns, warning beacons, etc.) typically used on work or off-
road vehicles (trucks, SUV's, ATV/UTV, boats, heavy equipment, farm equipment, etc.). The unit works
on 12V DC and provides output to four terminals which are protected by a 40A fuse.
Please note that the remote control can be clipped onto a visor, or conveniently stored within the
vehicle for easy access. It uses a 12V, A23 size alkaline battery included with the kit. If the remote
control is lost or broken – it can be replaced and the new remote "paired" with the existing RCLS.
Installation
1.
Please read these instructions carefully before installing this product. It is recommended to
consult a professional installer to prevent damage to vehicle and/or system.
2.
Do not connect to 24V DC or higher voltage system, as this product is designed for a 12V DC
battery system. In case you have a larger than 12V DC system, check vehicle owner's manual to
determine if a 12V DC output is available and how to connect in order to use it safely, otherwise,
the product will be damaged.
3.
Find a suitable flat surface near the battery, clean the surface free of dirt and oil and then affix the
unit using provided adhesive strips and/or mounting holes.
4.
Remove the 40A fuse from the holder and disconnect the vehicle battery.
5.
Securely attach the positive (red) cable of the RCLS unit to the positive terminal of the battery or
battery cable and the negative (black) cable of the RCLS to the negative battery cable or chassis.
6.
Attach the auxiliary lights/equipment following correct polarity on the terminals and not exceeding
the maximum amperage of the channels. See FIG 1 (on page 2)
7.
Reconnect battery cables.
8.
Insert the 40A fuse back into the holder and snap the cover close.
9.
Test by pressing remote button and checking accessory operation. Remote includes a 12V (A23
alkaline) battery. Recycle used battery as per local codes.
Page 2 of 12
Patent Pending
© Copyright 2018
NV622 • REMOTE CONTROLLED LIGHTING SYSTEM • OWNER'S MANUAL
Hopkins Manufacturing Corporation
Emporia, KS 66801
www.nVisionLighting.com
NVISIONLIGHTING.COM
1-800-835-0129
Rev. A
Tabla de contenido
loading

Tabla de contenido