HOMEDEPOT CLARKSTON 44 Guía De Uso Y Cuidado página 9

Assembly — Hanging the Fan (continued)
4
Attaching the fan motor assembly
to the mounting bracket
□
Remove one of the four screws (TT) on the mounting
bracket (C) and loosen, but do not remove, the other
three screws (TT).
□
Remove the motor assembly (D) from the J hook.
□
Lift and place the key holes (1) on the mounting plate
(H) over the three screws previously loosened on the
mounting bracket (C) and turn the mounting plate (H)
until it locks in place and no longer turns.
□
Secure by tightening the three screws previously
loosened and the screw (TT) previously removed.
C
1
D
5
Finishing the fan installation
□
Align the four large screwheads (UU) pre-locked on the fan
housing (E) to the key holes (1) of the mounting bracket (C).
□
Turn the fan housing (E) at the right side and twist the
screwheads (UU) to the end of the slotted holes (2) until they
lock in place and no longer turn.
WARNING: Ensure you complete this step correctly and
follow all steps. Failure to correctly follow this step might
cause the fan to fall.
2
1
H
TT
9
Please contact 1-877-527-0313 for further assistance.
C
UU
E
HOMEDEPOT.COM