Assembly; Making The Electrical Connections - HOMEDEPOT CLARKSTON 44 Guía De Uso Y Cuidado

Assembly — Hanging the Fan (continued)
3
Making the electrical
connections
WARNING: To avoid possible electrical shock, be sure
electricity is turned off at the circuit breaker or main fuse box
before wiring.
WARNING: Check to see that all connections are tight,
including ground, and that no bare wire is visible at the wire
nuts, except for the ground wire.
Follow the steps below to connect the fan to your house
supply wires. Secure the wire nuts (DD) supplied with your fan
by wrapping the connections with electrical tape.
□
Connect the black (HH) and blue (II) color wires from the
fan to the hot wire (black) (JJ) from the ceiling.
Connect the white (KK) color wire from the fan to the
neutral wire (white) (LL) from the ceiling.
□
If there is a ground wire (MM) (green color or bare copper
color) in your outlet box, connect the green wire (NN)
from the fan to it. If there is not a ground wire in your
outlet box, connect the green wire (NN) from the fan to
the green wire (OO) from the mounting bracket (C).
Secure the wire connection with the plastic wire nuts (DD).
JJ
MM
OO
LL
DD
KK
NN
D
HH
II
□
If you wish to install an optional wall control, use this diagram
as a guide but refer to the installation manual for the wall
control for the correct color and wire connections.
PP: Fan wall control
QQ: Light wall control
RR: Fan wall control output wire
SS: Light wall control output wire
JJ
QQ
LL
MM
MM
OO
NN
C
D
8
PP
RR
SS
SS
RR
LL
HH
DD
II
KK
C