RECARO C 6000 MB ACTROS 4 Instrucciones De Montaje página 39

H
Direction of travel
Direction of travel
4. Place the adapter (1) onto the seat adapter (3).
Take note of the markings!
5. Screw all screws (2) from the installation kit through the adapter (1) into the seat adapter (3), finger-tight
only.
6. Tighten the screws (2) with the stipulated torque.
Torque: M8 screws: 25 Nm ± 2 Nm
Warning!
Ensure that you neither exceed nor fall short of the torque listed above.
If the torque is insufficient, the screws will work loose whilst you are driving. The thread might be
damaged if the torque is too high. The risk of an accident and being injured whilst driving exists in
both cases.
The vehicle must be stopped immediately if a screw works loose and the screws must be replaced
by new screws and tightened up to the stipulated torque with the screw locking device.
RECARO Automotive Seating
1 Adapter high
2 M8x20 installation kit screws
3 Seat adapter
1 Adapter low
2 M8x20 installation kit screws
3 Seat adapter
Page 14