Troubleshooting Table - Kohler 1263840 Guía De Instalación Y Cuidado

Operation (cont.)
A wired audio device can be connected to the auxiliary-in port on
the amplifier.
Audio input may be slightly delayed when a device is initially
connected.
Wireless Input
Once a BLUETOOTH device is paired, the LED will be solid blue
and the audio input will fade-in.
On the BLUETOOTH user device, the amplifier will display as
"VibrAcoustic".
If a BLUETOOTH pin number is required, use "0000".
NOTE: For more information on system operation, refer to the
Homeowner's Guide.
Troubleshooting
IMPORTANT! Turn off the power supply before performing any
maintenance.
NOTE: For service parts information, visit your product page at
www.kohler.com/serviceparts.
This troubleshooting guide is for general aid only. For service and
installation issues or concerns, call 1-800-4KOHLER.

Troubleshooting Table

Symptoms Probable Cause
1. One or more A. Transducer wire is
transducers do
not produce
sound.
Kohler Co.
Recommended Action
A. Make sure the wires
not connected are properly
properly. connected to the
amplifier. Each
transducer has a
white with black
wire which is the
positive (+) lead, and
a solid white wire
which is the negative
(-) lead.
9 1298482-2-A