Tools And Materials; Before You Begin - Kohler 1263840 Guía De Instalación Y Cuidado

Specifications
Ambient Temperature
Maximum Relative Humidity
Electrical Service
Power Cable Length
Data Cable Length
Output Power
Frequency Response
Signal/Noise Ratio
Total Harmonic Distortion

Tools and Materials

Before you Begin

WARNING: Risk of electric shock. Disconnect power before
servicing.
CAUTION: Risk of product damage. The amplifier is rated to
operate in temperatures up to 104°F (40°C). Do not install near heat
sources (such as radiators or heat registers) or in any location where
the temperature may exceed 104°F (40°C).
NOTICE: This product is not water-resistant. Do not install in a
location where excessive moisture, high humidity levels, or
condensation are present.
NOTICE: Follow all electrical and building codes.
1298482-2-A
Max 104°F (40°C)
90% non-condensing
120 VAC, 50/60 Hz, 1.3 A Max
36" (914 mm)
6' (1.83 m)
90 Watts total
20 Hz - 18 kHz +/- 3dB
>75 dB
<0.1% at 1 Watt, <1% at full output
power
Plus:
• Wire Cutter/Stripper
2 Kohler Co.