Operation - HAMPTON BAY HB-7900-02 Guía Para El Uso Y Cuidado

Installation (continued)
6
Mounting the magnet
Use the small screws (BB) (or the large screws (CC) if
using the magnet spacer (D)) to mount the magnet (C).
Remove the back of the magnet (C) by pushing
in the tab on the bottom of the magnet with a
small screwdriver.
Place the magnet back against the mounting
surface and mark the two screw holes.
Drill two 1/16 in. pilot holes.
Attach the magnet back with the small
screws (BB). Tighten securely and snap on the
front of the magnet (C).

Operation

1
Adjusting the doorbell volume
The doorbell (A) has an adjustable volume control
located on the side. Rotate the thumbwheel up or
down to adjust the volume.
2
Adding wireless push buttons
NOTE: Wireless push buttons can be added to this
doorbell. The push buttons are sold separately.
D
See the owner's manual of the push button accessory
for instructions to sync with this doorbell.
6
B
CC
A