Tabla de contenido
Idiomas disponibles
Idiomas disponibles
How to Prepare and Use the Equipment:
- Check that the equipment is completely clean, the power knob is in the OFF position
and that the power cord is not connected to the power outlet.
- Gently remove the water tank from the base.
- Unscrew the cap on the underside of the tank, and fill the water tank
to the peak level.
Note: Do not carry full water tank by the handle only. Always hold full water tank with
two hands.
- Screw the cap back on, and fit the water tank right side up back into the base
of the unit, making sure it is properly secured in place.
- Connect the equipment to a power outlet.
- Use the mist regulation knob to turn the unit ON by moving the knob clockwise.
- The power indicator light illuminates green when the unit is ON, and vapor will start
to exit.
- Use the mist regulation knob to control the amount of vapor flow desired.
- To turn the unit OFF, turn the knob counterclockwise. The power indicator light
will turn off when the unit is OFF.
- When the water level runs too low, the power indicator light turns red
and the humidifier stops automatically.
Tabla de contenido
