Vivanco CHH 8000 Instrucciones De Uso página 3

GB
5. Thereafter, press the Pairing button of the cordless headphones for 10 seconds and
thus confirm your selection.
6. If you wish to operate several sets in parallel, repeat steps 1-5 for the next set.
Commissioning several cordless headphones to one transmitter (max. 7
numbers):
Always keep in mind that the transmitter and the cordless headphones can be a
maximum of 60 cm from one another.
1. Switch on the transmitter and the cordless headphones and make sure that music
can be heard. The operation indicator light on the cordless headphones glows
continuously.
2. Now take the second set of cordless headphones and switch it on. The operation
indicator light flashes.
3. Press the Pairing button of the transmitter for 10 seconds
4. Thereafter, press the Pairing button of the cordless headphones for 10 seconds.
5. The second cordless headphone set is now also paired with the transmitter and you
can hear your music.
6. Repeat the steps for every additional cordless headphone set.
Using batteries or rechargeable batteries
Opening the battery compartment
1. To open the battery compartment, carefully pull off the ear cushion from the left side
earshell "L". The battery compartment is located behind this.
2. Insert the batteries or rechargeable batteries (micro, type AAA) into the battery
compartment, observing the correct polarity.
3. Place the ear cushion over the battery compartment again and press it carefully until
it latches.
Charging the supplied rechargeable batteries
1. Switch off the RF headphone.
2. Place the RF headphone in the charging tray with the side marked "L" to the left.
3. Charging of the rechargeable batteries starts automatically and the charging
indicator light of the charging tray switches to red.
4. If the charging indicator light does not become red, move the headphone a little back
and forth in the charging tray till the charging contacts engage correctly and the
charging indicator light glows red.
5. Caution: Before using the batteries the first time, charge them continuously
for 8 hours to achieve full capacity.
The cordless headphone set has a charge-protecting battery charging function for
longer running time of the batteries. After about 8 hours, the discharged batteries
get completely charged again and the charging indicator light goes off. You can now
enjoy your music for about 11 hours at average loudness levels.
All manuals and user guides at all-guides.com
7