Oven Racks; Rack Positions; Aluminum Foil And Oven Liners - Haier QSS740 Manual Del Usuario

Cocina eléctricas
Ocultar thumbs Ver también para QSS740:
Tabla de contenido
Idiomas disponibles

Idiomas disponibles

USING THE RANGE

OVEN RACKS

Rack Positions

Recommended rack positions for various types of foods are
provided in the Cooking Guide. Adjusting the rack position is
one way to impact cooking results. For example, if you would
prefer darker tops on cakes, muffins or cookies, try moving
food one rack position higher. If you find foods are too brown
on top, try moving them down next time.
When baking with multiple pans and on multiple racks, ensure
there is sufficient space between pans to allow air to flow.
This may improve cooking evenness.
Removing and Replacing Flat Racks
When placing and removing cookware, pull the rack out to
the bump (stop position) on the rack support.
To remove a rack, pull it toward you until it reaches the stop
position, tilt up the front of the rack and pull it out.
To replace a rack,
place the curved end
of the rack onto the
rack supports. Tilt up
the front of the rack
and push the rack in
until it stops. Then lay
the rack flat and push
it in until it is all the
way into the oven.
Racks may become
difficult to slide.
To improve sliding
conditions, use a soft
cloth or paper towel
to rub vegetable oil
on the left and right
edges of the racks
and/or rack supports.
NOTE: Remove
unused racks when
using the oven for
faster preheat,
improved efficiency,
and optimal cooking
performance.
49-2000682 Rev. 0
Rack positions
Rack stop
position
Removing racks
Replacing racks

ALUMINUM FOIL AND OVEN LINERS

CAUTION
Do not use any type of foil or oven liner to
cover the oven bottom. These items can trap heat or melt,
resulting in damage to the product and risk of shock, smoke
or fire. Damage from improper use of these items is not
covered by the product warranty.
Foil may be used to catch spills by placing a sheet on a lower
rack, several inches below the food. Do not use more foil
than necessary and never entirely cover an oven rack with
aluminum foil. Keep foil at least 1-1/2" from oven walls to
prevent poor heat circulation.
15

Capítulos

Tabla de contenido
loading

Tabla de contenido