Safety Warnings - marklin 260 Serie Manual De Instrucciones

Only when the locomotive is operated with the
Control Unit, Mobile Station, or Central Station:
G Switching range (canceling of the acceleration/-
braking delay that has been set for the locomotive).
G Controllable Telex couplers front and rear.
Depending on the technical version of this loco-
motive, the Telex couplers can be controlled
together (from f2) or separately (from f2 and f3).
Maintenance procedures that become necessary
with normal operation of the locomotive are des-
cribed below. Please see your authorized Märklin
dealer for repairs or spare parts.
No warranty or damage claims shall be accepted in
those cases where parts neither manufactured nor
approved by Märklin have been installed in Märklin
products or where Märklin products have been
converted in such a way that the non-Märklin parts
or the conversion were causal to the defects and / or
damage arising. The burden of presenting evidence
and the burden of proof thereof, that the installation
of non-Märklin parts or the conversion in or of Märklin
products was not causal to the defects and / or
6
damage arising, is borne by the person and / or
company responsible for the installation and / or
conversion, or by the customer.

Safety Warnings

G This locomotive is to be used only with an operating
system designed for it (Märklin 6646/6647
AC transformer, Märklin Delta, Märklin Digital
or Märklin Systems).
G This locomotive must never be supplied with
power from more than one transformer.
G Pay close attention to the safety warnings in the
instructions for your operating system.