Operation - Fermax iLOFT 4+N Manual De Instrucciones

Monitor iLoft 4+N Monitor iLoft 4+N Monitor iLoft 4+N Monitor iLoft 4+N
Monitor iLoft 4+N Monitor iLoft 4+N Monitor iLoft 4+N Monitor iLoft 4+N Monitor iLoft 4+N Monitor iLoft 4+N

Operation

NOTE: If there is more than one iLoft monitor in the system and a call is made to a
monitor, the rest of the monitors will show a blue led warning that the channel is busy.
Answering a call
When the call button on the Street Panel is pressed a call tone is emitted
both at the panel and on the monitor, and the screen goes on.
Press the button
the street and the home will be opened; operation is in hands-free mode.
The communication will automatically end after 90 seconds, or at any
time by pressing the button
conversation lasts.
If communication is not established with the street panel, the monitor will
automatically go off after 30 seconds.
Opening the door
When a call is received from the street panel, it is possible to open
the door at any time, by pressing the button
Manual Activation of the Monitor (Auto-start)
(function availability depends on the type of installation)
With the monitor on standby, press this button
the monitor on manually.
In order to view the image from the rest of cameras (if it exists
more than one), maintain pressing the button
To activate the audio and speak to the visitor or open the door, carry out the
steps described above.
If communication is not established with the street panel, the monitor will
automatically go off after 30 seconds.
to speak with the visitor. The audio channel between
. The LED will remain on (blue) while the
for 1 second to switch
for 2 seconds.
Pag 17