Napa CARLYLE DATA12 Manual De Instrucciones página 7

STEP 5: ZERO- RESET ADAPTOR
Press to zero-reset the adaptor.(suggested)
•
Refer to "POWER ON AND AUTO ZERO
•
RESET" and "ZERO RESET".
STEP 6: CHECK P/T MODE OF TORQUE
(Torque Only)
Refer to "P/T MODE SELECTION" to set P or
•
T- mode operation of torque.
Definition
T-mode torque view
1. In T-mode, if a force is applied on adaptor, LCD
displays and tracks the current torque value.
2. After releasing force, the LCD value will return
to target setting view.
P-mode torque view
1. In P-mode, LCD displays the maximum torque
value.
2. After releasing force, the LCD shows the
catched maximum value. (flashing)
STEP 7: START TO ROTATE ADAPTOR
Rotate the adaptor clockwise or
•
counter-clockwise.
Note: The adapter works in both direction
clockwise and counter clockwise.
DATA12, DATA14, DATA38
Press
7
N-m
N-m
M T
M T
N-m
N-m
M P
M P
Rev. 02/15/12