Wi-Fi Set-Up - QIMMIQ DV360 4K Guía De Usuario

Middle indicator: light with blue when connected to the camera,
light with red when charging and light with purple when charging and
camera is on.
Right indicator: Blink with green during video recording; flicker once
for each picture, when picture captured.
NOTE:
Please pair your camera and remote control before using the
remote.
Pairing your camera and remote control
1. Make sure your camera and remote control have enough memory.
2. Press and hold the «Picture» & «Video» (B&C) buttons of the remote and
POWER button on the camera at the same time.
3. When the middle indicator lights up blue, the setup is finished.
NOTE:
Your remote control only needs to be paired once. Next time, the
camera will be recognized automatically. Wi-Fi function and Remote Control
cannot be used simultaneously.

WI-FI SET-UP

Make sure your camera has enough battery to use the Wi-Fi function.
Download the application from Google Play™ or App Store™ "
to your smartphone or tablet.
Turn on the camera, then press Wi-Fi button to enter into the Wi-Fi
mode. If you wish to disconnect, press the Wi-Fi button again to switch to main
interface.
Go to Wi-Fi settings of your wireless device, then you can see "WIFI-Qim-
miQ DV360 4K" in the list. Click it to connect the camera.
Input password "12345678
52
" to connect the camera with your wireless
5
U
U
"