marklin 96 Serie Manual De Instrucciones página 6

Function
• Possible operating systems:
6646/6647 Märklin Transformer, Märklin Delta,
Märklin Digital, Märklin Systems.
• Recognition of the mode of operation: automatic.
• Addresses that can be set: 01 – 80.
Address set at the factory: 09.
• Mfx technology for the Mobile Station / Central Station.
• Name set at the factory: BR 96 006
• Adjustable acceleration.
• Adjustable Braking delay.
• Adjustable maximum speed.
• Setting the locomotive parameters electronically
with the Control Unit, Mobile Station or
Central Station.
• Built-in sound effects circuit, can only be used in
operation with the Control Unit or Märklin Systems.
• Additional sound effects that can be controlled.
WARNING! This product contains magnets. Swal- This product contains magnets. Swal- This product contains magnets. Swal-
! ! ! ! !
lowing more than one magnet may cause death in lowing more than one magnet may cause death in lowing more than one magnet may cause death in lowing more than one magnet may cause death in lowing more than one magnet may cause death in lowing more than one magnet may cause death in lowing more than one magnet may cause death in lowing more than one magnet may cause death in lowing more than one magnet may cause death in lowing more than one magnet may cause death in
certain circumstances. certain circumstances. certain circumstances. certain circumstances. certain circumstances.
If necessary, see a doctor immediately. If necessary, see a doctor immediately. If necessary, see a doctor immediately. If necessary, see a doctor immediately. If necessary, see a doctor immediately. If necessary, see a doctor immediately. If necessary, see a doctor immediately. If necessary, see a doctor immediately.
6
Safety Warnings
• This locomotive is to be used only with an operating
system designed for it (Märklin 6646/6647 AC transfor-
mer, Märklin Delta, Märklin Digital or Märklin Systems).
Use only transformers rated for your local hou-
!
sehold power.
Do not under any circumstances use transfor-
mers rated for 220 volts or 110 volts
• This locomotive must never be supplied with power
from more than one transformer.
• Pay close attention to the safety warnings in the
instructions for your operating system.
• The feeder track must be equipped to prevent
interference with radio and television reception,
when the locomotive is to be run in conventional
operation. The 74046 interference suppression set
is to be used for this purpose.
The maintenance work necessary with normal operation
of this locomotive is described below. Please see your
authorized Märklin dealer for repairs or spare parts.
No warranty or damage claims shall be accepted in those cases where
parts neither manufactured nor approved by Märklin have been installed
in Märklin products or where Märklin products have been converted in
such a way that the non-Märklin parts or the conversion were causal to
the defects and / or damage arising. The burden of presenting evidence
and the burden of proof thereof, that the installation of non-Märklin parts
or the conversion in or of Märklin products was not causal to the defects
and / or damage arising, is borne by the person and / or company
responsible for the installation and / or conversion, or by the customer.