Idiomas disponibles
Idiomas disponibles
EAS1010
Set the Relay Activation Time for ZONE 1
Access the programming mode, then:
Press "*" and "1": the indicator will flash yellow; enter a number from 00 to 99, the indicator will turn yellow
and a long beep will be heard, indicating that the unlocking time has been set susccessfully. 00-99 is the
delay time in seconds. i.e.: 05 means the unlocking time is 5s. If the unlocking time is 00: enter the input
code once to open the door, then type the input code again to close the door.
Press "#" to exit the setting menu.
Set the Relay Activation Time for ZONE 2
Access the programming mode, then:
Press "*" and "5": the indicator will flash yellow; enter a number from 00 to 99, the indicator will turn yellow
and a long beep will be heard, indicating that the unlocking time has been set successfully. 00-99 is the
delay time in seconds. i.e.: 05 means the unlocking time is 5s. If the unlocking time is 00: enter the input
code once to open the door, then type the input code again close to the door.
Press "#" to exit the setting menu.
Delete all User Codes, Restore Default Settings
Access the programming mode, then:
Press "*" and "8" (theindicator will flash yellow), and press "8" twice, (a sequence of short beeps will be
heard, ending in a continuous beep, and the indicator will turn yellow), indicating that all user codes have
been deleted successfully;
Press "*" and "8" (the indicator will flash yellow), and press "9" twice, (a continuous beep will be heard and
the indicator will turn yellow), indicating that the default settings have been restored successfully. Press "#"
to exit the setting menu.
If inappropriate data is entered, 2 beeps will sound. The device will automatically return to the previous
settings if nothing happens for 30 seconds while the beeps are heard. If you are not in the setting mode
and enter an incomplete number, the device will automatically return to the previous settings if nothing
happens for 5 seconds while the beeps are heard.
When the relay ZONE 1 is activated, the door indicator will light up green.
When the relay ZONE 2 is activated, the door indicator will light up red.
If you forget the admin code, press and hold "#", then turn the device on. A beep will sound, indicating
that the default admin codes have been restored successfully.
Digit length is 2->default admin code is 12,
Digit length is 3->default admin code is 123,
Digit length is 4->default admin code is 1234,
Digit length is 5->default admin code is 12345,
Digit length is 6->default admin code is 123456 (up to 6).
Edit the Administrator Code
Access the programming mode, then:
Press "*" and "3": the indicator will flash yellow, then enter a new administrator code twice (the length of
the new admin code must be the same as the previous code) and a beep will be heard, indicating that the
change was performed successfully.
Press "#" to exit the setting menu.
ENGLISH
10
