Hkoenig KOL6012 Manual De Utilización página 7

8) Other functions
A. Energy saving：Background light in LCD screen will light up for 10 seconds then automatically off if
you touch any key when unit is energized or background light is off.
：Unit will start
B. Auto-clean
modes.
C. Energy Conversation: Low energy consumption under Energy Conversation mode.
3. Remote Control Operation
Up and down button
Fan speed button
Timer button
Sleep button
1) Power: Press this button to start the unit when it is energized or stop the unit when it is in operation.
2) Mode: Press this button to select operation mode.
3) : Press this button to increase room temperature and timer setting.
4) : Press this button to decrease room temperature and timer setting.
5) Fan: Press this button to select fan speed in sequence: Low → Medium → High.
6) Auto-Swing: Press this button to turn on or turn off auto-swing function.
7) Sleep: Press this button to select or cancel sleep mode (only effective under cooling operation or
energy conversation modes).
8) Timer: press this button to set AUTO-ON and AUTO-OFF time. Time can be adjusted between
0.5-24 hours. It jumps by 0.5 hour interval within 5 hours, and 1 hour interval over 5 hours, set time
will flash 5 times on screen then confirm the setting.
Before using your remote, install the AAA batteries into remote control.
1) Press and glide the battery cover on the back of the remote control, then you can remove the cover.
2) Insert two new alkaline AAA batteries into the battery compartment, being sure to note the proper
polarity.
Reattach the battery cover, making sure the locking tab clicks into place.
Be sure to note proper
polarity of batteries
and keep three minutes before off under COOL, DEHUMIDIFY
LCD display window
Power button
Mode button
Auto-swing button
Auto-clean button