Monitoring Single Or Multiple Locations - Maxon TRUTALK WX-80 SAME Instrucciones De Uso

VIII. PROGRAMMING YOUR WX-80
Understanding SAME Geographic..., Continued
in particular counties of interest, you can program up
to 15 FIPS codes into the weather monitor's memory.
This allows you to avoid hearing an alert that applies
to an area that is possibly several counties from you.
Obtaining Your Area's FIPS Code(s)
To obtain the FIPS code for your current location,
call the National Weather Service toll free at
1-888-NWR-SAME (1-888-697-7263). Follow the
instructions as prompted to enter your state and county
location. The system will respond with the FIPS code
for that county. If you are close to a county line, you
might want to obtain the codes for the neighboring
county or other nearby counties of interest to you.

Monitoring Single or Multiple Locations

Your WX-80 Weather Monitor will monitor either a
single location or up to 15 locations, determined by
the number of SAME Geographic Codes you enter, or choose to monitor.
To set the weather monitor to single or multiple
locations, use the following steps:
1. With the WX-80 powered on, push the
OFF/PROGRAM button for 2 seconds to set
mode to program.
, Continued
17