Idiomas disponibles
Idiomas disponibles
VIII. PROGRAMMING YOUR WX-80
Setting the Alert Type, Continued
The weather monitor is set to the ALERT setting as
the factory default. To change the alert type setting to
VOICE (or to check the current selection), follow these
steps:
1. With the WX-80 powered on, push the
OFF/PROGRAM button for 2 seconds to
set mode to program.
2. Press the YES button once to advance to the Alert
Type setting. The current alert pattern selection
(VOICE or ALERT) appears on the display.
3. To select the alternate setting (choosing VOICE
instead of ALERT or choosing ALERT instead
of VOICE) press the NO button. The alternate
setting appears. To toggle between settings,
press the NO button more than once. Your
selection is saved by pressing the YES button.
NOTE: Pressing the NO button repeatedly will alternate
or toggle between the selection of ALERT and VOICE.
4. When your selection appears on the display, push
the YES button to store the selection and
advance to the next programming step, (Setting
the Backlight) or push the OFF/PROGRAM
button for 2 secondsto store the selection and
set mode to operate. The current alert status
, Continued
13
Capítulos
