Technical Characteristics - DELTA DORE PoE SW4 Manual De Instalación

Technical characteristics

Interfaces 10/100 Mbps RJ45 port
Priority port
Energy Store and transfer
MAC table
MAC learning
Switching capacity
PoE power PoE standard
PoE power supply mode
PoE port
Max. port output
Max. total output
Extended mode
Lightning Port
protection
Lightning-protected
classification
power supply
Electric power
Operating
temperature
Storage
temperature
Max.
transmission
speed
Network
10
5
Port 1
Supported
1 k
Automatic identification
1 Gbps
IEEE 802.3af, IEEE 802.3at
Supports the 8-pin power supply, pins
1,2,3,6 and pins 4,5,7,8 can be supplied
simultaneously
1 - 2 - 3 - 4
30 W
58 W
Supported
4KV
4KV
INPUT: 100-240 VAC 50/60 Hz 1.5 A
OUTPUT: 51 V DC, 1.25 A
0°C/40°C
Humidity: 10% ~ 90%
without condensation
-40/70°C
Humidity: 5% ~ 90%
without condensation
Ethernet: 10 Mbps (Half Duplex)/20 Mbps
(Full Duplex) Fast Ethernet: 100 Mbps (Half
Duplex)/200 Mbps (Full Duplex)
IEEE 802.3, IEEE 802.3u, IEEE 802.3af,
IEEE802.3at, IEEE 802.3x
1 - Presentation
2 - Package contents
3 - Description
3.1 Front panel:
3.2 Rear panel
4 - Installation recommendations
4.1 To achieve optimum operation:
4.2 Cable type to use
5 - Installation
5.1 Mounting on support
5.2 Mounting in VDI unit
5.3 Connection
5.4 Extended mode
Because of changes in standards and equipment, the characteristics given in the text
and the illustrations in this document are not binding unless confirmed.
EN
12
12
13
13
13
14
14
14
15
15
15
16
16
11