C-LOGIC 5200 Manual De Instrucciones página 20

3.2.10 DC Current
range
Resolution Accuracy
660µA 0.1µA
6600µA 1µA
10µA
66mA
100µA
660mA
10A 10mA
Overload protection:
µA and mA position: Fuse FF600mA/1 OOOV,
A position: Fuse FF1 OA/1 OOOV.
When the target current is larger than 5A, do not continue
measurement for more than 1 O sec. Pause for 1 minute
after the measuring.
3.2.11 AC Current
range
Resolution Accuracy
660µA 0.1µA
6600µA 1µA
10µA
66mA
100µA
660mA
10A 10mA
Overload protection:
µA and mA grade: Fuse FF600mA/1000V,
A position: Fuse FF1 OA/1 OOOV.
- Frequency range: 40 - 400Hz
- Response: Average, calibrated in rms of sine wave.
When the target current is larger than 5A, do not continue
measurement for more than 1 O sec. Pause for 1 minute
after the measuring.
±(1.0% reading + 5 digits)
±(2.0% reading + 5 digits)
±(1.5% reading + 5 digits)
±(3.0% reading + 5 digits)
13
3.2.12 Temperature
Range Input
Ambient Temp ±2 digits
º
C 400 C
º
0-1000
º
1000 C
Ambient Temp ±2 digits
º
º
32-1832 F 800 F
º
1800 F
4. Using the Meter
4.1 Data Hold
4.1.1 During a measurement, press the "HOLD" button
once to hold the reading.
4.1.2 Press "HOLD" again to release the hold.
4.2 Manual Range
4.2.1 In voltage, current, resistance and capacitance
modes, the default range is "AUTO"
4.2.2 Press "RANGE" to enter manual ranging.Each
press switches to a higher range.Pressing the
button at the highest range will return to the lowest
range.
4.2.3 Hold "RANGE" to return to "AUTO"
4.2.4 Pressing "RANGE" in Max/Min mode will return the
meter to normal reading.
Note: Manual range is disabled in frequency mode.
4.3 Relative Measurement
4.3.1 Press "REL6.to enter relative measurement. T his
will store the reading when pressed and display the
difference between current reading and the stored
reading.
4.3.2 Press "REL..6." again to return to normal.
Test Range Accuracy
±4 digits
±(1.0% of reading
±5 digits
+3 digits)
±4 digits
±20 digits
14