Technical Specifications - C-LOGIC 5200 Manual De Instrucciones

3.2 Technical Specifications

3.2.1 average value Characteristics
Average response digital multimeter, when the input a
pure sine wave, you can accurately measure the rms of
sine wave, but the non-sinusoidal RMS measurement is
not precise enough.
3.2.2 lmpedance Characteristics
Normal impedance(1 OM) with normal testing capabilities .
Ghost voltage can occur when power supply
3.2.3 DC Voltage
range
Resolution Accuracy
660mV 0.1mV
6.6V 0.001V
66V 0.01V
660V 0.1V
1000V 1V
- Input impedance: 1 OMO
- Overload protection: 660mV range: 250V DC or AC
(RMS),6.6V-1 000V range: 1 000V DC/AC (RMS)
- Maximum input voltage: 1 OOOV DC
±(0.8% of reading + 3 digits)
±(0.5% of reading + 5 digits)
±(0.8% of reading + 3 digits)
09
3.2.4 AC Voltage
range Resolution Accuracy
±(1.5% of reading
660mV 0.1mV
+ 5 digits)
6.6V
0.001V
±(1.2% of reading
+ 5 digits)
66V 0.01V
660V 0.1V
±(1.0% of reading
+ 3 digits)
1000V 1V
- Input impe dance: 1 OMO
- Overload protection: 660mV range: 250V DC or AC
(RMS),6.6V-1 OOOV range: 1 OOOV DC/AC (RMS)
- Maximum input voltage: 1 OOOV AC (RMS)
- Response: Average, calibrate d in rms of sine wave.
3.2.5 Resistance
range
Resolution Accuracy
6600 0.10
6.6k0 0.001k0
66k0 0.01k0
660k0 0.1k0
6.6MO 0.001MO
66MO 0.01MO
- Open circuit voltage: approx. 1 .0V
- Overload protection: 250V DC /AC (RMS)
Frequency Range
40-60Hz
40-400Hz
40- 400Hz
±(0.8% of reading + 5 digits)
±(1.5% of reading + 5 digits)
10